ISO 9001:2015
SCC*
SoKa Bau

KALPOXY 150

Wear protection / acid protection

KALPOXY 150 is a two-component, corundum-based, epoxy bonded solid compound. This material is intended for the lining of structural elements and their repair in order to protect against abrasive wear and is also suitable for use on overhanging surfaces and for laying on stainless steel.

KALPOXY 150 is designed for optimum durability and high quality.

Product preparation and application: 

Preparation of metal surfaces:

The surfaces must be clean and dry. Roughing the contact surface of the base increases the adhesive properties (sandblasting or brushing). No additional reinforcement is required.

Preparation of mineral surfaces:

The surfaces must be clean and dry. Roughing the contact surface of the base increases the adhesive properties (sandblasting or brushing). No additional reinforcement is required.

The residual moisture content of the substrate must be <4%. If necessary, the surface can be coated with a suitable primer prior to application.

Preparation of materials for wear protection:

Not required.

Note:

The KALPOXY 150 two-component system is supplied in pre-metered packaged units.

Stir vigorously the contents of 1 bucket of resin / hard material and 1 can of hardener until ready to use.

For optimum results, the resin / hard material must be mixed first to avoid possible delamination.

Application:

Trowel and spatula
Spread KALPOXY 150 ready-to-use mixture evenly on the substrate surface with a trowel in a layer of the required thickness. Then you can flatten the surface.

Other:

Due to the peculiarities of the technological process, deviations in the characteristics of the product are possible. These include typical characteristics of epoxy bonded products such as workability, cure times and product properties due to temperature and application. All specifications are approximate values. They are based on analysis of test results for specific samples and cannot be used as a basis for guarantees for which SBS Industrial Solitions is legally responsible. The manufacturer reserves the right to make technical changes and errors.

Gallery