Our specialists can develop an individual refractory solution already at the stage of preparation for the repair or your oven / equipment relining. Depending on the task at hand, a well-thought-out concept of a new refractory lining / masonry is created, taking into account all conditions and wishes.
| Lining material | Hardness | Technological parameters | Notes | |||||
| Mohs (1) |
Vickers HV (2) |
Max. transport speed m/ s |
transported material density g/sm3 |
Max. temperature deg. C (3) |
Thermal shock resistance |
Impact wear resistance |
||
| KALSICA-S Silicon Carbide Ceramic |
9,3 | (2.300) | 35 | >3,0 | 1,000 | ++++ | ++ | For extreme conditions |
| KALOCER oxide ceramics |
9,1 | (2.100) | >30 | >3,0 | 350 | 0 | + | Standard slabs, thin walls, mosaics |
| KALCOR Zirconium corundum |
9 | (2.000) | >30 | >3,0 | 800 | ++ | ++ | Large details, shaped parts, thick walls |
| KALSICA-N Silicon KALINOX Carbide Ceramics |
8,8 | (1.800) | >25 | >3,0 | 1000 | +++ | + | |
| KALCOR-S Sintered Zirconium Corundum |
8,5 | (1.600) | >25 | 800 | +++ | ++ | Economical KALCOR |
|
|
KALCRET-B |
8,1 | (1.250) | 22 | ≤3,0 | 800 | +++ | + | Supplied as a dry solution, seamless, high temperature resistant |
| CERAM-B Fused basalt |
8 | (1.140) | 22 | ≤3,0 | 350 | 0 | + | Withstands flow up to 3.0 (g/cm3), up to 22 (m/s), temperature restrictions |
| METALL-W 100 Hard layer overlay |
(7,5) | 700 | 20 | – | 350 | ++ | ++ | Impact strength, light weight |
| KALMETALL-C 153 Bleached cast iron |
(7,2) | 580 | 20 | – | 350 | ++ | +++ | Impact strength, economical with a large number of elements |
| KALCERAM Hard ceramics |
6 | (500) | – | – | 350 | 0 | + | Bunker lining, promotes slip |
(1)Mohs scale is only suitable for ceramics, for other materials only comparative values are given (in brackets)
(2) Vickers HV data refer to metals only, for other materials only comparative values (in brackets)
(3) Temperatures quoted refer to typical operating conditions
| Lining material |
Promoting slip |
Max. temperature |
Wear resistance | Notes |
| °C | ||||
| KALEN High-slip plastic |
+++++ | 80 | + | No corrosion, very smooth surface, light weight |
| KALINOX High-slip steel |
+++ | 550 | ++ | Promotes slip while wearing and sticking problems |
| KALCERAM Hard ceramics |
+++ | 350 | +++ | Promotes slip and powerful wear protection |
| ABRESIST Fused Basalt |
+++ | 350 | ++++ | High throughput when transporting hard abrasive materials |
